I will definately try this! Time to check the wiring. When I give it power both active green and Interaction orange lights turn on, Non-blinking. Well the usb port on the emanage blue is not a true usb interface, the port on the EMB is a TTL module with a usb female plug. Facebook Twitter Digg del.

Uploader: Tubei
Date Added: 20 October 2012
File Size: 33.1 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 63793
Price: Free* [*Free Regsitration Required]

I don’t think anyone on this forum uses the Greddy Emanage anymore.

If your laptop no longer support a serial DB9 port you will have to use a usb-serial adapter with the DIY cable. See each listing for international shipping options and costs. Do we need a special cable in order to connect the eManage Blue to a computer?

Remove Advertisements Sponsored Links. Well the usb port on the emanage blue is not a true usb interface, the port on the EMB is a TTL module with a usb female plug. Up for sale is a good working used Greddy Emanage Ultimate with the ush wiring harness. You will need one of these that will accept an operating voltage of 5 volts.

Its time to do a Converter side loopback test. You may hsb your Emanage or computer or both. Up for sale is a new Emanage blue.


Emanage Blue Usbto Usb Cable

Credit goes to everyone else that helped put little pieces together for me, Jake in particular. Be sure to use a multimeter to check that you really have vcc, or gnd, etc before soldering into the board.

This must be changed, change this to an area such as c: If this has helped you let me know! I believe a main unit update may do the same as well communications menu. Use an old dead mouse or nick something from work 5 Use a soldering iron to remove the old connections in the USB socket, noting which end of the 4 terminals you remove the black cable from 6 solder the DKU in place such that the black ground goes where the black of the USB was, then the RX on the next pin white in my case then TX sub the next pin blue for me.

Using your hands pull this back and unravel it to reveal the four wires on the inside. Essentially this involves using windows hyperterminal and gredsy the correct pins, and making sure the data the computer sends out routes back to itself.

HOW-TO: Emanage “USB to USB” data link cable for 5 dollars!

If not, what kind of cable should we ask from our local computer shop? How can I make it work? Has Greddy Adapter wired in for gt.


One area was spliced to run it through fire wall. Did that the first time I tried.

eManage Blue USB cable – Forum

I am trying to help a friend of mine program emanzge eManage Blue. Very hard to find new in box as they are discontinued from Greddy! Change that in the emanage blue unit and then click to connect and voila! You can keep a close eye on what is happening internally with the vehicles you rely on. Originally Posted by mozso. I have soldered a dku-5 off ebay straight into a usb type-A connector. I found that I had to set the comm. Your email address gredd not be published.

E-manage is not in The time now is Also shop in Also shop in. Step 3 — Software Emanage can be downloaded from uzb emanage group on yahoo.

Previous post: