Information to prevent damage to the components when trying to complete a task. Tips and additional information to aid in completing a task. This Line Out lime jack connects a headphone or a speaker. Otherwise, conflicts arise between the two PCI groups making the system unstable and the card inoperable. No need to use a DOS-based utility or boot from a floppy disk. Take note of the marked corner with gold triangle on the CPU. Otherwise, the system would not power up.
|Date Added:||16 July 2006|
|File Size:||13.27 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Drivers may also be available for free directly from manufacturers’ websites.
ASUS P4PE2-X, Socket 478/N, Intel Motherboard
If you are using any other operating systems, disable the Hyper-Threading Technology item in BIOS to ensure system stability and performance. The lever clicks on asusyek side tab to indicate that it is locked. Before you install or remove any component, ensure that the ATX power supply is switched off or the power cord is asuetek from the power supply. Remove the caps only when you are connecting the front assustek audio cable. Pin 5 is removed to prevent incorrect insertion when using ribbon cables with pin 5 plug.
Place this side towards the rear of the chassis Chapter 1: Drivers are the property and the responsibility of their respective manufacturers, and may also be available for free directly from manufacturers’ websites. Move the jumper cap from pins default to pins The second type is these ones to which our experimental, partially modular systems belong.
When lit, this green LED indicates that the system is ON, in sleep mode, or in soft-off mode, a reminder that you should shut down the system and unplug the power cable before removing or plugging in any motherboard component.
If possible, disconnect all power cables from the existing system before you add a device. According to the preliminary information, the product features x No need to use a DOS-based utility or boot from a floppy disk.
Contact a qualified service technician or your retailer. About this guide Conventions used in this guide To make sure that you perform certain tasks properly, take note of the following symbols used throughout this manual.
Long AGP cards when installed may interfere with memory socket.
p4p2-x Removing the cap will cause system boot failure! Under Linux, use the Hyper-Threading compliler to compile asuxtek code. Canadian Department of Communications Statement This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.
The illustration below shows the location of the onboard LED. There is no possibility of increasing the length of the cables, replacing them in the occasion of damage, or simply dismantling unnecessary lines.
Do not overtighten the screws! Expansion slots To install and configure an expansion card: Refer to Table 1 for details. This port connects to your serial mouse and other serial devices.
ASUS P4PE2-X – motherboard – ATX – Socket – iPE Overview – CNET
Tips and additional information to aid in completing a task. These documents are not part of the standard package. CPU Parameter Recall feature. Find the proper orientation and push down firmly until the connectors completely fit.
Hold components by the edges to avoid touching the ICs on them. Otherwise, the system would not power up. The minimum recommended wattage is W, or W for a fully configured system.
ASUS P4PE2-X Memory Upgrades from Data Memory Systems
In 6-channel mode, the function of this jack becomes Rear Speaker Out. Visit the ASUS website www. Connect the fan cables to the fan connectors on the motherboard, making sure that the black wire of each cable matches the ground asusetk of the connector.